New pages
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)
- 20:54, 21 August 2014 Obtaining (hist) [938 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Obtaining [http://www.fdtdxx.com FDTD++] can be obtained at no charge [http://www.fdtdxx.com/download/ here]. Note that the above is the only official distribut...")
- 21:50, 1 July 2014 Geometries file (hist) [1,627 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Geometric modeling The '''geometries file''' is a computer-aided design (CAD) or mesh file defining a structure that can be imported by [http://www.fdtdxx.com FDT...")
- 21:19, 1 July 2014 Computer-aided design import (hist) [1,238 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Geometric modeling The preferred method of geometric modeling is '''computer-aided design (CAD) import''', where a CAD geometry is imported...")
- 21:24, 18 June 2014 Visualizing the electromagnetic fields with VisIt (hist) [973 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials Category:Visualization tutorials")
- 18:57, 18 June 2014 Sources (hist) [2,323 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Sources Currently, the '''source''' in [http://www.fdtdxx.com FDTD++], is generally-defined so as to provide accurate Fourier-transformed field...")
- 18:11, 18 June 2014 FDTD++ tutorials (hist) [470 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials Category:FDTD++ tutorials # Scattering by a dielectric sphere # Scattering by a metallic sphere # ...")
- 17:31, 18 June 2014 Scattering by a metallic sphere (hist) [3,593 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "{{DISPLAYTITLE: Tutorial: Scattering by a metallic sphere}} Category:Tutorials This is the first '''tutorial''' in a series of tutorials, created to help new...")
- 20:38, 16 June 2014 Visualization tutorials (hist) [354 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials Category:Visualization tutorials This section provides a series of '''tutorials''' that illustrate the use of the open source software interactive ...")
- 20:37, 16 June 2014 Computer-aided design tutorials (hist) [517 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials Category:Computer-aided design tutorials This section provides a series of '''tutorials''' that illustrate the use of the open source software [htt...")
- 20:09, 16 June 2014 Computational domain discretization (hist) [1,713 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Computational domain In order to solve Maxwell's equations using the finite-difference time-domain method, the Computation...")
- 18:30, 16 June 2014 Work directory (hist) [151 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Running The '''work directory''' is the directory where [http://www.fdtdxx.com FDTD++] is run and where you would like output directed to.")
- 04:33, 16 June 2014 Compilation options (hist) [891 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Compiling A number of '''compilation options''' can be set through the use of macros that control the compilation of [http://www.fd...")
- 03:59, 16 June 2014 Compiling on Unix-like (hist) [565 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Compiling Below are instructions for compiling [http://www.fdtdxx.com FDTD++] on a '''Unix-like'' operating system. ==Instructions== # Untar fdtdxx...")
- 19:56, 15 June 2014 Yee cell (hist) [669 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:FDTD discretized using a Cartesian mesh with circulating electric and magnetic field components, known as the Yee-cell<r...")
- 05:58, 12 June 2014 Creating a sphere dimer with SALOME (hist) [4,864 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials This tutorial [http://www.salome-platform.org/ SALOME]. By the end, you will learn * Familiarize you with creating complex shapes (multiple bodies) * Fa...")
- 22:17, 11 June 2014 Introduction to SALOME (hist) [259 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials '''IGNORE BELOW UNTIL THIS MESSAGE IS REMOVED''' * Geometry module * Mesh module * Object Browser")
- 21:33, 11 June 2014 Scattering by a dielectric sphere (hist) [6,848 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "{{DISPLAYTITLE: Tutorial: Scattering by a dielectric sphere}} Category:Tutorials This is the first '''tutorial''' in a series of tutorials, created to help n...")
- 21:32, 11 June 2014 Creating a sphere with SALOME (hist) [6,067 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials This tutorial will further familiarize you with [http://www.salome-platform.org/ SALOME], demonstrating how to create simple geometries. T...")
- 20:48, 11 June 2014 List of material parameters (hist) [3,983 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Materials Category:Appendices A list of material parameters that the user can define is provided below, in bold, along with a brief de...")
- 19:08, 11 June 2014 Periodic boundary condition (hist) [1,437 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Boundary conditions Category:Computational domain '''Periodic boundary conditions''' allow one to simulate periodic structures. Currently, ...")
- 19:07, 11 June 2014 Absorbing boundary condition (hist) [4,490 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Boundary conditions Category:Computational domain '''Absorbing boundary conditions''' can be used to simulate objects in ''infinite'' domains. This is accompl...")
- 02:36, 11 June 2014 Interior computational domain (hist) [4,272 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Computational domain In addition to simply defining domain dimensions, one must also define the material properties, sp...")
- 02:35, 11 June 2014 Exterior computational domain (hist) [1,622 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Computational domain The '''exterior computational domain''' includes the total computational region and boundary conditions, The '''comp...")
- 21:59, 10 June 2014 Finite-difference time-domain (hist) [357 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:FDTD This section will be created soon. In the meantime, see Ref.<ref>A. Taflove and S. C. Hagness, “Computational Electrodynamics: The Finite-Difference Time-D...")
- 21:56, 10 June 2014 Convolution perfectly matched layer (hist) [677 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Boundary conditions A discussion of '''convolution perfectly matched layer''' ('''CPML''') is coming soon. In the meantime, see Refs.<ref>J. A. Roden and S. D. Ge...")
- 20:14, 10 June 2014 Defining a simulation (hist) [562 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Simulation There are four")
- 19:59, 10 June 2014 In development (hist) [1,161 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "[http://www.fdtdxx.com FDTD++] is an ambitious project, with a number of goals. These include, but are not limited to: * The most fully-featured Electromagnetics|electromagn...")
- 19:48, 10 June 2014 Simulation-dependent parameters (hist) [358 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Simulation parameters Because '''simulation-dependent parameters''' are, as the name implies, simulation-dependent, it is '''impossible''' to provide specific ins...")
- 19:33, 10 June 2014 Running in parallel (hist) [1,348 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Running In your work directory, open a terminal. Then, the precise command to execute [http://www.fdtdxx.com FDTD++] in '''parallel''' depends on the version of M...")
- 19:33, 10 June 2014 Running in serial (hist) [1,297 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Running In a work directory (where you would like output directed to), open a terminal. Then, type: <code>FDTDxx_dir/FDTDxx param materials</code> where <code>...")
- 18:57, 10 June 2014 Geometries subroutine (hist) [3,017 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Geometric modeling '''NOTE''': This method of geometric modeling is depreciated in [http://www.fdtdxx.com FDTD++]. The recommended procedur...")
- 18:17, 10 June 2014 Simulation-independent parameters (hist) [992 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Simulation parameters '''Simulation-independent parameters''', as the name implies, do not depend (or only weakly depend) on a given simulation. As such, they hav...")
- 18:55, 9 June 2014 Geometric modeling (hist) [557 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Geometric modeling [http://www.fdtdxx.com FDTD++] provides powerful and flexible '''geometric modeling''' capabilities.")
- 18:50, 9 June 2014 List of simulation parameters (hist) [10,668 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Parameters A list of '''parameters''' that the user can define is provided below, in bold, along with a brief description. ==Computational grid== ====Grid size==...")
- 18:29, 9 June 2014 Simulation parameters (hist) [743 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Parameters Both [http://www.fdtdxx.com FDTD++] and the finite-difference time-domain method itself contain a number of '''parame...")
- 18:55, 8 June 2014 Boundary conditions (hist) [1,571 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Computational domain Through the use of '''boundary conditions''', [http://www.fdtdxx.com FDTD++] can model nearly '''any''' Computational domain|computational ...")
- 17:10, 5 June 2014 Permittivity (hist) [68 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Basic placeholder ==Relative permittivity== placeholder")
- 17:15, 3 June 2014 Tutorials (hist) [618 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Tutorials ==List of tutorials== [[[Tutorial 2|Tutorial 2:Transmission through a thin film]]")
- 17:09, 3 June 2014 Known issues (hist) [2,220 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "This page lists '''known issues''' with [http://www.fdtdxx.com FDTD++]. These are considered to be relatively minor issues, with known workarounds. Therefore, they do not warr...")
- 19:01, 31 May 2014 Materials (hist) [2,695 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Materials '''Materials''' are defined in '''FDTD++''' using a simple, yet powerful material model that is capable of capturing the dielectric response of a List...")
- 17:25, 31 May 2014 Zshift (hist) [195 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "{{DISPLAYTITLE: zshift}} Category:Parameters '''zshift #''' shifts the structure, defined in structure.cpp, along the $z$-direction by '''#'''.")
- 17:24, 31 May 2014 Yshift (hist) [195 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "{{DISPLAYTITLE: xshift}} Category:Parameters '''xshift #''' shifts the structure, defined in structure.cpp, along the $x$-direction by '''#'''.")
- 17:23, 31 May 2014 Xshift (hist) [195 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Parameters '''xshift #''' shifts the structure, defined in structure.cpp, along the $x$-direction by '''#'''.")
- 19:19, 27 May 2014 Default settings (hist) [241 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "By default, the propagation of a Gaussian-damped sinusoidal pulse through a free space, 50 nm$^3$ computational domain will be simulated. The following sections de...")
- 20:33, 26 May 2014 Computational domain (hist) [917 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Domain placeholder")
- 03:22, 26 May 2014 Running (hist) [1,117 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Running After compiling, '''FDTD++''' can be executed from the command line by typing 'FDTDxx param'")
- 22:20, 25 May 2014 Requirements (hist) [2,088 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "'''FDTD++''' has been developed to be, at the lowest level, minimally-dependent on external libraries. However, '''FDTD++''' can also utilize sophistic features available in ...")
- 21:26, 25 May 2014 Output (hist) [1,646 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "'''FDTD++''' provides two types of output, simulation output and user output. The former is output generated by '''FDTD++''...")
- 09:32, 24 May 2014 Parameters file (hist) [2,084 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with "Category:Parameters The '''parameters file''' ... ==Creating the parameters file== The '''parameters file''' can be created using any text editor, and can be named by any...")
- 07:04, 24 May 2014 Conventions (hist) [970 bytes] Jeffrey M. McMahon (Talk | contribs) (Created page with " <math> </math> // Ex (i+1/2, j, k) // Ey (i, j+1/2, k) // Ez (i, j, k+1/2) // // Hx (i, j+1/2, k+1/2) // Hy (i+1/2, j, k+1/2) // Hz (i+1/2, j+1/2, k)")
